Opt7 Light Bar Installation Instructions
Opt7 Light Bar Installation Instructions. We've got a new line of sirius light bars that are much less expensive than a lot of the other big names, all aluminum housings, double row flood/spot combo, and very high quality. Don't worry, the led strips aren't heavy enough to damage it at all however this part, although easy, is the most irritating because you must poke a hole large enough to feed the zip tie through without losing the hole.
Then strip the thick black insulation to expose the blue and black wires, then strip those 2 to expose the wires. They have 3w cree leds in them and carry a 3 year warranty. Also tried plugging the light directly into the trailer plug but had the same problem.
This Particular Light Bar Did Not Come With A Wiring Harness.
Lightly attach the center section of the light bar at its marked location, and finally the right side. The easiest install for this is to just poke a few small holes in the rainbow padding up against the wall and slide a few zip ties though to secure it to that. Mounting the bolts to hold the bracket tightly as the picture shows.
The Best Way To Deal With The Problem We Mentioned Above Is To Add Some Wiring Harness For The Lights.
1.put a towel next to the car box, with a flat head screwdriver pry the car logo, 18w flood cree led light bar 4inch 2pcs ，off road. Connect your light bar directly to the vehicle battery or another dc voltage source as soon as you open the box. Tap the reverse wire into the center wire in.
We've Got A New Line Of Sirius Light Bars That Are Much Less Expensive Than A Lot Of The Other Big Names, All Aluminum Housings, Double Row Flood/Spot Combo, And Very High Quality.
Redline tail light brake bar. This video shows how to install a tailgate light bar on a 2017 chevy colorado. Line up with existing frame holes that match up with slider mounting points.
Also, I Had To Make A Small Notch In The Plastic Of The Bar For The Tire Access Hole.
3 bolts in total, two on top, and the third is hidden underneath. It makes the install cleaner, easier, and it's cheap! Install the slider with bolts.
Blade Quick Connect Harness For 2019+ Silverado/Sierra 1500 Sku:
I put the 60 opt7 on my 2015 recently and just used the little self trappers with the supplied brackets. After the wire harness is disconnected from the control box,. Planning on doing some towing?
Post a Comment for "Opt7 Light Bar Installation Instructions"